CPE008B Outdoor CPE |
Hardware Specifications |
Features | Instructions |
Chipset | CPU：AR9344 RF：AR9344 | |
Ethernet | IEEE802.3u MDI / MDIX 10/100 IEEE802.11a Wireless LAN Port IEEE 802.11n Wireless LAN | |
DDR | 64Mbyte | |
Flash Memory | 8Mbyte | |
PoE Power | 12V | |
CPU Frequency | 533MHz | |
Gain | Bull-in 14dBi Antenna | |
Wireless Configuration | 2×2 (2Tx,2 Rx) | |
Ethernet Interface | 2 Base Ethernet Ports | |
Ethernet Physical Rate | 10/100Mbps | |
Reset Button | The device to restore factory settings | |
Way of system upgrade | Supporting upgrade through the web page by cable or wireless devices
Supporting upgrade from cable mouth through TFTP way. | |
LED Light | Power Indictor Light l Power Light On：Power On/System Startup l Power Light Out：Power off/System Shut down Wire Indictor Light l Light Out：Ethernet Ports connection is broken. l Light On： Ethernet Ports connection is normal l Light Flicker：The data package is transmitted. Wireless Indictor Light（AP Model） l Light Out：wireless closed l Light Flicker：The data package is transmitted. Wireless Indictor Light（Client Model） | |
Power Supply | 12VDC@1.5A | |
Data Rate | 11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps HT20:7.2M,14.4M,21.7M,28.9M,43.3M,57.8M,65M,72.2M,14.4M,28.9M,43.3M,57.8M,86.7M,115.6M,130M,144.4M HT40:15M,30M,45M,60M,90M,120M,135M,150M,30M,60M,90M,120M,180M,240M,270M,300M | |
Transmission Mode | DSSS | |
Modulation | OFDM/BPSK/QPSK/CCK/DQPSK/DBPSK | |
Frequency Range | China : 5.725 GHz ~ 5.850 GHz (Chanel149 -- Chanel165) | |
Power Consumption（12V) | ≦ 900mA | |
RF Power @25℃ (±1.5dB) | 802.11a | 6-24Mbps | 26 ± 2dBm | |
| | 36-48Mbps | 26 ± 2dBm | |
| | 54Mbps | 25± 2dBm | |
| 802.11n | HT20 | MCS 0-3 | 26 ± 2dBm | |
| | | MCS 4 | 26 ± 2dBm | |
| | | MCS 5 | 25.5 ± 2dBm | |
| | | MCS 6 | 25 ± 2dBm | |
| | | MCS 7 | 24.5 ± 2dBm | |
| | HT40 | MCS 0-3 | 26 ± 2dBm | |
| | | MCS 4 | 25.5± 2dBm | |
| | | MCS 5 | 25± 2dBm | |
| | | MCS 6 | 24.5 ± 2dBm | |
| | | MCS 7 | 24 ± 2dBm | |
Sensitivity | | IEEE 802.11a 6Mbps≦-89dBm 54Mbps≦-73dBm | IEEE 802.11n HT 20 MCS 0≦-86dBm MCS 7≦-68dBm HT 40 MCS 0≦-83dBm MCS 7≦-65dBm | |
Software Specification |
Features | Instructions/Default value |
Standard | IEEE 802.3 and 802.3u 10Base-T 与100Base-TX Physical layer standard IEEE 802.11a/n Protocol | |
Language | Chinese/English | |
Condition | Connection status The bridge model The DHCP client list | |
System | Basic setup | Ethernet rate | Auto | |
| | Operational Model | Bridge,WISP | |
| | Name | CPE100C | |
| | 802.1d Protocol | support | |
| | STP Forward Delay | STP forward delay | |
System state | System state | Choose language | Chinese/English | |
| WAN status | The network connection type | DHCP | |
| | Wide area network IP | 0.0.0.0 | |
| | Gateway | 0.0.0.0 | |
| | Internet connection time | 0 day 0 hour 0 minuter 0 second | |
| LAN status | LAN IP | 192.168.0.1 | |
| | DHCP Server Status | Turn off | |
| Wireless network state | Operational Model | Client mode | |
| | SSID(name of network) | N/A | |
| | Encryption Mode | NO | |
Wireless Settings | Basic setup | Close the wireless networks | Forbidden | |
| | Wireless Mode | Client，AP | |
| | SSID | Any（accept any kind AP） | |
| | 802.11 Mode | 802.11 a/n | |
| | HT Protect | Forbidden | |
| | Antenna | Bull-in (14dBi) | |
| | Output power | 100% | |
| | Rate Control | Auto | |
| | Channel Mode | Auto,a,20 MHz,40MHz | |
| | Expand channel protected mode | None | |
| | MAC Copy | Forbidden | |
| CPE Setup | CPE Mode | Client Mode，WDS Client Mode，AP+WDS Mode | |
| | Security (authentication type) | Open system,WEP,WPA-PSK,WPA2-PSK | |
| | Internet access configuration | Bridge Model，DHCP,PPPOE | |
| Advanced Settings | Country code choice | China，ETSI,Brazil, Europe, Japan，FCC | |
| | The subcontract threshold | 256－2346（default 2346） | |
| | Transfer request threshold | 0－2347（default2346） | |
| | ACK time-out control | 0－255us(default64) | |
| | Packet Aggregation | Open | |
| | Short GI | Open | |
| | The wireless user isolation | Isolated unicast frame, broadcast frames, isolation of multicast frames, isolation so frames | |
| | Input power | 100%,50,25%,12.5%,6% | |
| IP | IP type | Static State | |
| | IP address | 192.168.0.1 | |
| | Subnet Mask | 255.255.255.0 | |
| | Gateway IP Address | 192.168.0.254 | |
| | LAN Settings | IP address | 192.168.0.1 | |
| | | Subnet Mask | 255.255.255.0 | |
| | | DHCP Server | Server | |
| | | DHCP IP Address Range | 192.168.0.2 – 192.168.0.253 | |
| | | DHCP Subnet Mask | 255.255.255.0 | |
| | | DHCP Gateway | 0.0.0.0 | |
| | | Lease Time | 86400 | |
| Time Zone Settings | Current Time | N/A | |
| | Time Zone | （GMT+08：00）Peking | |
| | NTP client updating | Forbidden | |
| | NTP Server | 192.5.41.41 | |
| | Manual Settings IP | 0.0.0.0 | |
| Security Settings | Network encryption | Open System,WEP,WPA-PSK,WPA2-PSK | |
| | data encryption | No | |
| | WEP Password | Null,WPA-PSK,WPA2-PSK | |
Management | Password Setting | Use name | |
| | New password | |
| | Confirm Password | |
| Software Upgrading | |
| Backup/restore the configuration file | Save configuration file | |
| | Upload the configuration file | |
| | Reset options to default | |
| | Reboot | |
Tool | system log | |
Physical Specifications |
Features | Instructions |
Dimension | 235 (length) × 88(width) ×40(height) mm | |
Weight | ≦500g | |
Impermeability | Highly reliable waterproof performance | |
Environmental Specifications |
Features | Instructions |
Operating Temperature | -20~+70°C | |
Operating Humidity (No-condensing) | 10%~95% RH | |
Storage Temperature | -40~+85°C | |
Storage Humidity (No-condensing) | 10%~95% RH | |
Lightning protection level | 1.5 KV in common-mode, 1 KV in differential mode | |
Environmental | RoHs Standard |