批量出售全新语音网关 Linksys PAP2T-NA/SPA3102/SPA3000/SPA9000/SPA400
型号：SPA3102
批量热线：18926561652/18676379559
全新小灰盒包装。
配件：100-240V电源，网线，英文说明书，机器
产品保修1年，发货前均严格测试
请各位买家收到产品后当面打开包裹！7天内出
现故障运费由买卖双方各付一程。 保修1年.
VoIP to PSTN (USA) Service Call Origination and Termination
PSTN (USA) to VoIP Service Call Origination and Termination
Single Stage and Two Stage Dialing
Forward Calls to VoIP service - Selective, Authenticated, All
Forward Calls to PSTN service - Selective, Authenticated, All
PSTN Line Sharing with Multiple Extensions
Automatic PSTN Fallback (Loss of Power or IP Service to Unit - with Quiescence to Normal Operations)
Advanced Inbound and Outbound Call Routing
Independent Configurable Dial Plans - Up to 8
Force PSTN Disconnection
Sequential Dialing Support
Specifications:
Voice Gateway with Router
Specifications
Model
SPA3102
Data Networking:
MAC Address (IEEE 802.3), IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883), ARP - Address Resolution Protocol, DNS - A Record (RFC 1706), SRV Record (RFC 2782), DHCP Client - Dynamic Host Configuration Protocol (RFC 2131), DHCP Server - Dynamic Host Configuration Protocol (RFC 2131), PPoE Client - Point to Point Protocol over Ethernet (RFC 2516), ICMP - Internet Control Message Protocol (RFC792), TCP - Transmission Control Protocol (RFC793), UDP - User Datagram Protocol (RFC768), RTP - Real Time Protocol (RFC 1889) (RFC 1890), RTCP - Real Time Control Protocol (RFC 1889), DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349), VLAN Tagging - 802.1p, SNTP - Simple Network Time Protocol (RFC 2030), Upload Data Rate Limiting - Static and Automatic, QoS - Voice Packet Prioritization over Other Packet Types, Router or Bridge Mode of Operation, MAC Address Cloning, Port Forwarding
Voice Gateway:
SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264), SIP Proxy Redundancy - Dynamic via DNS SRV, A Records, Re-registration with Primary SIP Proxy Server, SIP Support in Network Address Translation Networks - NAT (incl. STUN), Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP, Codec Name Assignment
Voice Algorithms:
G.711 (A-law and μ-law), G.726 (16/24/32/40 kbps), G.729 A, G.723.1 (6.3 kbps, 5.3 kbps), Dynamic Payload, Adjustable Audio Frames per Packet
Fax Capability:
Fax Tone Detection and Pass-Through (Using G.711), Fax Pass-Though - Using G.711, DTMF: In-band & Out-of-band (RFC 2833) (SIP Info), Flexible Dial Plan Support with Interdigit Timers and IP Dialing, Call Progress Tone Generation, Jitter Buffer - Adaptive, Frame Loss Concealment, Full Duplex Audio, Echo Cancellation (G.165/G.168), VAD - Voice Activity Detection with Silence Suppression, Attenuation / Gain Adjustments, Flash Hook Timer, MWI - Message Waiting Indicator Tones, VMWI - Visual Message Waiting Indicator via FSK, Polarity Control, Hook Flash Event Signaling, Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI, Music on Hold Client, Streaming Audio Server - up to 10 sessions
Security:
Password Protected System Reset to Factory Default, Password Protected Admin and User Access Authority, Provisioning/Configuration/Authentication: HTTPS with Factory Installed Client Certificate, HTTP Digest - Encrypted Authentication via MD5 (RFC 1321), Up to 256-bit AES Encryption
Provisioning, Administration & Maintenance:
Web Browser Administration & Configuration via Integrated Web Server, Telephone Key Pad Configuration with Interactive Voice Prompts, Automated Provisioning & Upgrade via HTTP, TFTP, Asynchronous Notification of Upgrade Availability via SIP NOTIFY, Non-intrusive, In-Service Upgrades, Report Generation & Event Logging, Stats in BYE Message, Syslog & Debug Server Records - Per Line Configurable, Per Line and Purpose Configurable Syslog and Debug Options
Physical Interfaces:
2 100baseT RJ-45 Ethernet Port (IEEE 802.3) -- 1 WAN, 1 LAN, 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring), 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection
FXS
Ring Voltage: 40-55 VRMS Configurable
Subscriber Line Interface Circuit (SLIC)
Ring Frequency: 10 Hz - 40 Hz, Ring Waveform: Trapezoidal and Sinusoidal, Maximum Ringer Load: 3 REN, On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL, Off-hook current: 25 mA min, Terminating Impedance: 8 Configurable Settings including, North America 600 ohms, European CTR21
Reg. Compliance:
FCC (Part 15 Class B), CE, ICES-003, A-Tick Certification, RoHS
Power Supply:
DC Input Voltage: +5 VDC at 2.0 A Max.. Power Consumption: 5 Watts. Switching Type (100-240v) Automatic. Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input
Indicator Lights/LED:
Power, Internet, Phone 1, Phone 2
Documentation:
Quick Installation, User, and Configuration Guides, are downloaded fromwww.Linksys.com, Administration Guide - Service Providers Only, Provisioning Guide - Service Providers Only
Environmental
Dimensions:
3.98 x 3.98 x 1.10 in.
WxHxD:
(101 x 101 x 28 mm)
Unit Weight:
5.11 oz. (0.145 kg)
Operating Temperature:
32ºF to 113º F (0ºC to 45º C)
Storage Temperature:
-13ºF to 185º F (-25ºC to 85º C)
Operating Humidity:
10 to 90% Non-condensing, operating and non-operating
Accessories:
1x SPA3102
1 x RJ45 cable
1 x Universal Power Adaptor (100-240V)
1 x User Manual