产品描述
通过PCI-Express插槽扩展出16个SATA6G扩展卡 PCI-E SATA3.0扩展卡
产品特点
符合PCI快速规范V2.0和向后兼容的PCI Express 4X
兼容串行ATA规范3.1
PCI Express X4接口，并兼容PCI Express x8和x16插槽。
支持6 Gbps，通信速率3 Gbps和1.5 Gbps，
热插拔和热交换
支持原生命令队列（NCQ）
支持ahci 1编程接口寄存器的SATA控制器
支持积极的电源管理
支持错误报告，恢复和校正
支持消息信号中断（MSI）
支持可编程变送器的信号电平
支持FIS基于端口倍增器开关或命令的切换。
支持部分和睡眠电源管理状态
支持交错启动
与SATA 6G兼容，3G和1.5G硬盘。
注意：不支持RAID PM
包装清单
1 x SATA III（6Gbps）16端口PCI Express控制器卡
1 x用户手册
4 x SATA数据线
1×驱动光盘
系统要求
支持Windows® XP/Vista/7/8/8.1/10 Server 2003/2008 R2, Linux 2.6.x 版本和以上
英文说明：
Features
Compliant with PCI-Experss Specification v2.0 and backward compatible with PCI-Express 4x
Compliant with Serial ATA Specification 3.1
PCI Express x4 interface, and compatible with PCI Express x8 and x16 slots.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot plug and Hot Swap.
Supports Native Command Queue (NCQ)
Supports AHCI 1.0 programming interface registers for the SATA controller
Supports aggressive power management
Supports error reporting ,recovery and correction
Supports Message Signaled Interrupt (MSI)
Supports Programmable transmitter signal levels
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i
Supports Port Multiplier FIS based switching or command based switching.
Supports Partial and Slumber Power Management states
Supports Staggered Spin-up
Compatible with SATA 6G, 3G and 1.5G Hard Drives.
Note: Not Supported RAID on PM
Package Contents
1 x SATA III (6Gbps) PCI-Express Controller Card
1 x User Manual
4 x Mini SAS to SATA Cable
1 x Driver CD
System Requirements
Supports Windows® XP/Vista/7/8/8.1/10 Server 2003/2008 R2, Linux 2.6.x and above